MULTI VOLT(36V) Cordless Cleaner R36DA

 

155W Suction Power

72dB*1 Low Noise*2

  1. The noise level is shown for reference purposes and varies according to the measurement system used.
  2. Vs. HiKOKI R18DA cordless cleaner.

73,000RPM Brushless Motor

Approx.2X* More Durability

  • Vs. HiKOKI R18DA cordless cleaner.
Approx.2X* More Durability

Highly Efficient

High Performance Filter

A new high-performance fabric filter offers a filtration efficiency 36% greater than a conventional model*, thus capturing more fine dust.

  • Vs. HiKOKI R18DA cordless cleaner.
    The filtration efficiency was tested with 20g talc powder. Using the filter does not guarantee complete removal of dust particles and viruses.
High performance filter

Easy and Quick Dust Disposal

The dust case is designed for easy dust removal and eliminates the need for disposable bags.

1. Turn the dust case back and forth a couple of times.

Turn the dust case back and forth a couple of times.

2. All dust is collected in the vacuum cleaner.

All dust is collected in the vacuum cleaner.

3. Empty the dust case.
 

Bagless & Economical

Indicator Lamp

Filter Cleaning Indicator

Switch Panel

The suction power can be switched between 3 modes: 3 HIGH, 2 MID and 1 LOW.

Switch Panel

LED Light

For better vision while vacuuming.

LED Light

Continuous Operating Time per Charge*1

Battery Continuous Operating Time per Charge (Approx.) Charging Time (Approx.)
BSL36A18 2.5Ah High : 15min Mid : 30min Low : 60min 32min*2

 

 

  1. The stated continuous operation times are approximate, and the actual time varies depending on the battery state.
  2. When using the UC18YSL3 charger.

Specifications

Battery Voltage 36V
Dust Case Capacity 560mL
Suction Work Rate High 155W
Mid 65W
Low 35W
Noise Level *1 72dB
Continuous Operating Time*2
with BSL36A18
High 15min
Mid 30min
Low 60min
Overall Length 476mm / 1,003mm
(with extension pipe and floor nozzle)
Weight 1.6kg (inc. BSL36A18 Battery)
Standard Accessories*3 Flooring Nozzle, Crevice Nozzle,
Extension Pipe (with Nozzle Holder)
Available as Bare Tool unit

 

 

  1. The noise levels are shown for reference purposes and vary according to the measurement system used.
  2. The stated continuous operation times are approximate, and the actual time varies depending on the battery state.
  3. Standard accessories may vary by country or area.

Optional Accessories

Part Name Code No.
High Performance Filter High Performance Filter         376509
Rack Brush Rack Brush 375371
Round Brush Round Brush 375372
Flexible Hose Flexible Hose (full length 413mm) 375373
Angle Joint* Angle Joint (Maximum range of motion 40°) 375374
Extension Pipe (Short) Extension Pipe (Short) (full length 233mm) 375375

 

  • * Angle joint cannot be directly installed to the main unit. Use it as a set with the extension pipe or another accessory.

 

PDF:2,253KB

 

  • * Please contact local dealers for product availability and product details.