20mm (3/4") Impact Drill DV20VD
Aluminium Housing Body
The internal double-insulation construction with an aluminium die-cast body and a plastic stator holder
Incorporating the internal double-insulation construction with a plastic stator holder and an aluminium die-cast body which firmly holds the armature shaft, the durability of the motor and the tool body has remarkably improved.
Carbon brush rotation system extends carbon brush lifetime
-
The position of carbon brushes on a brush holder is shifted according to the rotation direction. This reduces commutation sparks that cause brushes to wear out, resulting in approximately twice the lifetime of carbon brushes compared to the previous model DV20VB2.
Powerful motor provides improved overload durability
Overload durability: Comparisons of the torques when the motors burn out, based on the durability index of the previous model taken as 100. (The values are for reference purposes. They vary according to conditions.)
Slip clutch *
causes the gears between the motor and drill bit to slip when an excessive load is suddenly applied, resulting in less reaction force.
- The DV20VD may not be equipped with a slip clutch by areas.
Userfriendly slide-type mode change lever
Useful high/low gear shift dial
-
No load speed Low 0 - 1,100 / min High 0 - 3,000 / min No load impact rate Low 0 - 14,300 / min High 0 - 39,000 / min 
Double-molded side handle
Soft and easy to grip for comfortable operation
Soft grip handle
For more comfort and control.
Specifications
| Model | DV20VD | |
|---|---|---|
| Drill Chuck | 1.5 - 13mm (1/16 - 1/2") | |
| Capacity | Concrete | Hi : 13mm (1/2") / Lo : 20mm (3/4") |
| Steel | Hi : 8mm (5/16") / Lo : 13mm (1/2") | |
| Wood | Hi : 25mm (1") / Lo : 40mm (1 - 9/16") | |
| Power Input | 860W | |
| No Load Speed | Hi : 0 - 3,000/min / Lo : 0 - 1,100/min | |
| Full Load Impact Rate | Hi : 22,000/min / Lo : 8,100/min | |
| Overall Length | Keyed Chuck | 365mm (14 - 3/8") |
| Weight *1 | 3.0 kg (6.6 lbs.) | |
| Vibration Total Values (triax vector sum) *2 |
Impact drilling into concrete |
Vibration emission value ah, ID = 16.6m/s2 Uncertainty K = 1.5 m/s2 |
| Drilling into metal | Vibration emission value ah, D = 2.9m/s2 Uncertainty K = 1.5 m/s2 |
|
| Standard Accessories | Chuck Wrench , Side Handle , Depth Gauge , Carrying Case |
|
- According to EPTA-Procedure 01/2003.
- Vibration total values (triax vector sum) determined according to EN60745.
Note: Manufacturer reserves the right to change specifications of parts and accessories without notice. Specifications and standard accessories may vary from country to country.